Has been tested on 2 different screens to confirm tolerances.
Tested Print settings- 0.2 Layer Height, 30% infill, printed back to face of build plate.
To confirm the exact GeekPi 7 model I used here→ https://a.co/d/cPXtGqt
I used 4 - M2.5 x 8mm bevel head screws.
CASE for GeeekPi 7 Inch Capacitive Touchscreen
by Eldon77 · original on Printables ↗
Gadgets / Portable Devices
♥ 37⬇ 533🖨 1 prints
License: Creative Commons — Attribution — Noncommercial — Share Alike ↗touchscreentouchscreencasegeeekpigeekpicase
Print profiles
7in_GeekPi_Touchscreen Case.3mfDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print