I wasn't satisfied with any of the models I found for clean/dirty dishwasher indicators, so I decided to practice some modeling and make my own. My wife hates the feel and sound of 3d print material sliding together, so I used a low-friction slider to reveal the correct state.
Slider snaps over the top of body after printing. Magnet holes fit for 15 x 3mm, I glued the magnets in slightly proud for best adhesion.
This is the first published version, follows alpha v1 that had .01 tighter tolerances, only 2 magnets, and deeper/smaller letter holes.p
Dishwasher clean/dirty indicator
by Jer · original on Printables ↗
Household / Kitchen
♥ 875⬇ 2.4k🖨 22 prints
Print profiles
dishwasher_slider_v2.stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
dishwasher_body_v2.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print