I wanted to print an all-in-one stand for the Quest 3 but most were either headset or controller stand options. This is a combination of my two favorite options available online.

I printed this on the Bambu P1S. The footprint of the model is slightly larger than the 256x256mm bed so I had to orient it vertically to print. I printed the model in the pictures above with the following settings:

Nozzle: 0.4mm
Layer Height: 0.24mm
Infill Percentage: 5%
Infill Pattern: Gyroid

Quest 3 All-in-One Stand

by Maker Mike! · original on Printables ↗

Gadgets / Video Games

♥ 186⬇ 2.7k🖨 6 prints

License: Creative Commons — Attribution — Noncommercial ↗standcontrollerheadsetmetaquest3

Print profiles

Quest_Stand_PLA_6h59m.3mfDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Quest_Stand.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print