Merry Christmas from the Fresh Prints, Hope everyone has a happy & safe holiday. Thanks Anycubic Community for all the support. You all have made this worth doing.
This cable drag chain system to help keep your bed cables in great shape.
Print Instructions:
- This is a tolerance part needs accurate dimensions as possible print in (Stable Mode) if using a Kobra 2 Series printer.
- Make sure your filament is dry
- Print 2 links out and check your printer's calibration. Links should snap together & pivot. (If fit is not right refer to Anycubic Kobra 2 "Flow Rate Cube" Calibration )
- ( If your having problems with PETG on printer switch to PLA the stock Prusa PETG Config from Anycubic is not that good.)
- 0.16mm layer height preferred for better results. But .20 will work.
- PLA smoother looking and working chain.
- PETG for strength and longevity. Rougher will smoothen out when wears in
- 25% percent infill or higher for links and mounts
- 100% infill for Link Caps
- You will need 15 to 16 links. I would just print 20 to have some spare.
- Please allow build plate to cool before removing the Cable Links. Will warp the part if removed to soon. To cool faster remove build plate from printer and put on cool flat surface. will rapidly cool the build sheet.
Compatible with these Sheet Aligners:
Coming Soon 1. Anycubic Kobra 2 PRO & Kobra 2 SNAP-ON Bed Sheet Aligners works with Strain Relief or with Cable Drag Chain
Also, if you don't wish to print out all the links. I designed the this drag chains end mounts.
to work with this Amazon Cable Chain. https://a.co/d/1TkEgJR
This is for the Kobra 2 PRO & Kobra 2. This is v1 (Medium Tolerance) Please do not remix.
Will be making two different tolerances versions in future update. This version was to find a happy medium to allow this Cable Drag Chain to be able to print on a well calibrated machine and also on very uncalibrated 3d printer.
- Low Tolerance: will be able to be printed on an uncalibrated 3D printer.
2. High Tolerance Model: Will be able to hang chain off a table and support itself. If the printer is not calibrated able to make dimensionally accurate prints it will not be able to print this correctly and will not flex with high tolerance model.
I would like to give a special thanks to @MisterMo_801827 for helping me test this. helped a lot in fine tuning this model.
Anycubic Kobra 2 Pro & Kobra 2 Cable Drag Chain
by FreshPrints · original on Printables ↗
3D Printers / Anycubic Parts & Upgrades
♥ 415⬇ 2.9k🖨 26 prints
Print profiles
Chain Link for Kobra 2 Kobra 2 Pro Plus v1.1.stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Chain Link Cover v1.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Top Mount for Factory Cable Support Kobra 2 Pro Plus v1.2.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Bottom Mount for Kobra 2 Kobra 2 Pro v2.stl.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Power supply Wire Guards for Kobra 2 Pro v1.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Bottom Mount for Kobra 2 Kobra 2 Pro v2.stl.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Top Mount for Factory Cable Support Kobra 2 Pro Plus v1.2.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Chain Link Cover v1.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Chain Link for Kobra 2 Kobra 2 Pro Plus v1.1.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print