Summary

I made this remix for the disc version that fits ;)
Corrected the anchor hole placement and depth.
Replaced the text "Teo's PS5" by PS5 in the correct font.

This is for normal orientation (PS logo facing towards you) of the PS5 with cables going to the left side. If needed you can mirror the part in the slicer to use it as a reversed orientation (PS logo facing towards the wall).

I made the upper part small and discrete in order to be able to ang a controller stand or so onto the front panel of the PS5.
This part is just to avoid the PS5 of tilting forward when you hang something in front

Print Settings

• Printer brand: Prusa
• Printer: I3 MK3S
• Rafts: No
• Supports: Yes Organic
• Resolution: 0.2
• Infill: 15%
• Filament brand: Prusament
• Filament color: Red
• Filament material: PLA
• Notes:Print on side with Organic support (should be correct orientation in the .stl provided)
  Place a support blocker on the PS5 text