A simple and smooth Christmas tree, printed in vase mode
LED tealight can still pass through if printed in vase mode with light colour filament.
To make the Christmas tree more robust it's recommended to print with the following settings:
2 walls
0% infill and 0 top and bottom layers
Reduce cooling fan speed to about 40%
Outer layer print speed: 20-30 mm/s
Nozzle temperature: 210-220 C
There is a compatible star and ball for the 2 wall tree version.
You can support me and get commercial license here: https://thangs.com/designer/CraftMeng
For one time support you can buy me a coffee on Ko-fi: https://ko-fi.com/craftmeng
Your support is greatly appreciated!
Merry Christmas and Happy New Year!
Christmas Tree
by CraftMeng · original on Printables ↗
Seasonal designs / Winter & Christmas & New Year's
♥ 356⬇ 1.9k🖨 23 prints
Print profiles
tree.stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
tiny ball.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
star half.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
tiny ball for tree wtih 2 walls.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
star half for tree with 2 walls.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print