This is a simple star for the tip of your Christmas tree.

Slicer Settings

These are the settings I used in OrcaSlicer. BambuStudio should have the same names for the settings. Other slicers might have different names for the settings.

Quality:

• Seam position: Back
• Precise wall: ON

Strength:

• Wall loops: 3
• Bottom shell layers: 0
• Sparse infill density: 0%

Support:

• Enable support: ON
• Type: Tree (auto)
• Top Z distance: 0.0 mm (to see this option, switch on ‘Advanced’)

Others:

• Brim type: Outer brim only
• Brim width: 10 mm

This should lead to a print like this:

The support can be easily removed, and typically, sanding of the contact area is not needed.

Happy printing :)

Changelog