NOTE: The images are of the BAMBU STUDIO model. As I do not own any Prusa printer, or know how to use Prusa Slicer properly, I cannot guarantee your prints will look the same as mine if you use the converted Prusa .3mf files.

If you sell prints of these models, you must be subscribed to my Patreon to maintain a license: https://www.patreon.com/thomastedwards

This little keyring is based on my larger Articulated Kohaku River Spirit model. It has some articulation, but the legs do not move.
I would not print it any smaller than the provided file. I also would not use it on items that go in a pocket or a bag. It's best used on the outside of a bag.

Due to the limit of 4 colours, the pupils are not black. A dab of acrylic or permanent marker works fine.

If you'd rather not have it as a keyring, simply delete the negative cylinder part as shown in the picture in Bambu Studio, and you're good to go! (both Kohaku and Shenron have the hole in the same place)



I printed mine without a brim; providing your hotbed is clean/freshly glued, you shouldn't need a brim either. Supports are not needed for this model; do not use them or the model can break when you remove it from the supports!