This is a fidget toy with a macaron appearance, and the cream filling clicky rotates. It provides a soft-click sensation and can be rotated with just the fingertips of one hand.

If you're looking for a satisfying clicking sensation try out my other fidget clicker toys.

Customizable click feeling and case design you can choose from:

Two types of wheels - normal or stiff (I recommend normal)
Two types of case design - regular or for keychain

Assembly:

Put the “spring” onto the “caseM” part.

2. Apply a very small amount of PTFE grease or similar to the inside of the “wheel” part.

3. Put the “wheel” on step 1 caseM.

4. Align the notches on both cases and snap-on the opposite side of the case. If printed with a properly calibrated printer, it should be possible to hold and smoothly rotate with the index and middle fingers.

Notes:

Recommended layer height: 0.15 - 0.20mm, In my case with slicer, layer heights above 0.28mm, the spring, wheel clearance lost are do not function.
This model may not achieve smooth rotation unless grease is applied to the inside of the wheel.
Do not use Matte PLA, Silk PLA, as they have weak layer adhesion and can break with snap-on.

Update:
[08/01/2024]
Case_F_v1.1, case_FK_v1.1 - We received many feedback that the case was rotating. We've fixed it to prevent the case from spinning.

My Other Fidget Toys:
https://www.printables.com/@BaGooN/collections/1156349

Clicky Macaron Spinner

by BaGooN · original on Printables ↗

Toys & Games / Other Toys & Games

♥ 1.6k⬇ 5.6k🖨 134 prints

License: Creative Commons — Attribution — Share Alike ↗fidgetfingertoy

Print profiles

CaseF.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
CaseF_Keychain.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Spring.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Wheel_normal.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Wheel_stiff.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
CaseM_v1.1.stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
CaseF_v1.1.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
CaseFK_v1.1.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print