🖨️ Print Shop
DUMMY 13 - Simplified Star Wars Speeder - V1.4

V1.4, 16. Aug. 2024:

  • Minor changes to the simple base
  • Minor changes to the display

V1.3, 20. Dec. 2023:

  • Simple base added

V1.2, 19. Dec. 2023:

  • Shorter lever rods 
  • Shorter lever handles
  • Panel added

V1.0, 17. Dec. 2023:

  • first release

I proudly present the DUMMSpeeder :D

The original model looks really great, but unfortunately the model is not easy printable with FDM printers.

So I started to redesign almost all the parts myself with Tinkercad.

The model is partly screwed together with M3 screws and consists of easy to print parts to get the best printing result. It was also designed with easy post-processing in mind. The design is inspired by various models.

Get the DUMMY 13 - Scout trooper here: /model/683529

V1.0 → V 1.2 / V1.3:

You do not need to print the lever parts again. Simply shorten the lever handles and lever rods to get the result as shown in the picture.

Printing notes:

  • Please double check the settings in the 3MF file (Orca slicer/BL Studio) first and change them according to your needs. However, it can help you to get a feel for how I printed the parts.
  • Parts such as rods are printed horizontally to achieve the greatest possible rigidity and can be easily post-processed afterwards.
  • Recesses and pins are mainly intended as a positioning aid for gluing. It is impossible to find the right tolerances for all printers and not everyone has a well-adjusted printer. Therefore, this solution seems to me to be a good compromise.

Assembly:

  • There are some parts that are screwed. 
  • Some parts MUST not be glued. See the following assembly instructions.
  • All other parts must be glued.
  • The screw holes are designed to be narrow. Widen them if necessary.
  • Use as short screws as possible. The holes are quite deep, so you can use longer screws if they lose their grip at some point.

Parts:

  1. Nose
  2. Nose base
  3. Nose mount 
  4. Front left
  5. Front right 
  • The inner rings help you to center the nose parts

Parts:

  1. 2x  front rod thin 
  2. 2x front rod thick 

Parts:

  1. Frame

Parts:

  1. Intake

Use 2 pieces of filament (TPU) to connect the holes of the air intake with the small holes of the frame (simulated fuel pipes or such).

Parts:

  1. Foot rest
  2. 1x M3 bolt

Parts:

  1. 2x Mudguard
  2. 2x Engine

Parts:

  1. 2x assembled mudguard
  2. Rear

Parts

  • Assembled frame
  • Seat
  • Button
  • 2x M3 bolts

Parts:

  1. 1x M3 bolt
  2. Assembled rear parts

Parts:

  1. Laser mount
  2. Laser 
  • There are 4 different laser mounts (3.8mm - 4.1 mm inner diameter)
  • Print them all and choose the one that stays on the pin of the frame without glue.
  • If you glue this, you will no longer be able to reach the screw underneath.
  • Glue the laser to the selected laser mount

Parts:

  1. The speeder you have assembled
  2. Exhaust
  • Insert the exhaust into the rear part at a slight angle and then push it in.
  • Do not use glue! If you glue it, you won't be able to reach the screw underneath.

Parts:

  1. 2x Levers
  2. 2x Lever handle
  3. 2x lever rod

Parts:

  1. The levers you have assembled
  • Push the levers into the seat and do not glue the lever rods to the seat.
  • This allows Dummy 13 to adopt different poses

Parts

  1. Weapon mount (optional)
  • Use glue or double-sided adhesive tape to attach the mount.

Parts

  1. Panel (optional)
  • Use ironing to get a smooth surface
  • The panel is simply inserted into the seat. You may need some glue.

Parts

  1. Simple base (optional)
  • This is a very simple base. A more advanced base may coming soon.
  • No glue!



 

DUMMY 13 - Simplified Star Wars Speeder - V1.4

by Mici · original on Printables ↗

Toys & Games / Action Figures & Statues

♥ 655⬇ 2.0k🖨 12 prints

License: GNU General Public License v3.0 ↗starwarsspeederdummy13

Print profiles

  • speeder_v1.3.3mfDEFAULT

    ⏱ time and weight estimated after preparation · 1 material(s)

    Made to order: we prepare this file when you order, which adds a few minutes before printing starts.

    Prints on: A1 mini 0.4PLA

    Order this print

  • speeder_v1.4_UNI_BL_p1.0.3mf

    ⏱ time and weight estimated after preparation · 1 material(s)

    Made to order: we prepare this file when you order, which adds a few minutes before printing starts.

    Prints on: A1 mini 0.4PLA

    Order this print