A sample of my upcoming paid pack of climbing holds

There are 8 sample holds for you to try which has been brought to you by my generous holiday spirit :)

Sample Crimp 1

A medium size crimp with a moderate amount of incut but a small edge

Sample Crimp 2

Similar to crimp 1 but smaller in length

Sample Crimp 3

A large jug

Sample Crimp 4

A so called 'dorito' crimp, which is what my friends like to call it, has two edges that are perpendicular to each other making a VERY versatile hold. I've been using this hold a lot and is one I'm glad to come across in commercial gyms. This one has a lot of incut and moderate sized edges

Sample Crimp 5

A very small crimp for maybe 3 fingers and can be used as a foothold

Sample Crimp 6

An incut mini jug

Sample Crimp 7

A small size crimp with a larger edge and slight incut

Sample Crimp 8

A small size crimp with a biased larger edge and slight incut

12/14/2023: Hopefully later this month I will upload the finished pack, but in the mean time enjoy this pack of samples! If you are interested in more holds check out my other samples and paid pack, which is linked below. I will post a link to this paid pack here once I upload it. It will be a pack of 30+ holds, still not sure on the exact amount right now, of similarly themed holds. The idea is to have a lot of different crimps/mini jugs to choose from to fill your home wall!

Here is the link to my first pack, I'll link the other one once I've finished it:

https://www.cgtrader.com/3d-print-models/hobby-diy/other/star-pack-climbing-holds https://cults3d.com/en/3d-model/tool/star-pack-climbing-holds

Also here is the link to a single paid hold I just uploaded on 12/16/23 :)

https://cults3d.com/en/3d-model/home/slopey-jug-edge-mki-climbing-hold

Mounting information:

3/8-16 bolt hole with 3/8 washer (3/4 OD washer)

No. 10 screw for the screw hole

Print with Cura's fuzzy skin experimental setting for texture, fuzzy skin settings used:

Fuzzy skin thickness: 0.3 (mm)

Fuzzy skin density = 6.0 (1/mm)

Fuzzy skin Point Distance = 0.1667 (mm)

Infill should be at least 30%, with at least 6 walls, and DO NOT OVERTIGHTEN!

I only weigh about 145 pounds and I've never had a hold break on me but be responsible and don't skimp out on material and print with more infill/walls for a stronger hold

Enjoy and let me know if there are any particular holds you want designed for your home walls! Also leave a comment if you need a version with different mounting holes, I will quickly add another STL file with custom bolt holes and screw holes if you need it.

Print Settings

Printer Brand:

Creality

Printer: 

Ender 3 Pro

Rafts:

No

Supports: 

No

Resolution:

.3

Infill: 

>=30

Filament: OVERTURE PLA White/Orange

Category: Sport & Outdoors