**Update 12/29 - Didn't realize the disc was missing. It was originally in the 3mf file, but the bambu ones don't open in Prusa Slicer so in the confusion of removing the non-compatible 3mf file the disc was left out. It's been added back in along with a 4 disc file and gcode to print the shooter and disc for the Mini, MK4 and Prusa XL.

----

Print in Place - Great Range - Don't Shoot at anything living (Duh)

Recommended Settings:

around .15mm layer height - 6 walls - 15% infill

*Could be printed faster at .20mm or .25mm

**I printed in PLA, but PETG may or may not be better

Either way would be a good print if you have some time while prepping another big one or want to finish out a roll of filament.

Mini Disc Shooter (Print in Place)

by Animeted · original on Printables ↗

Toys & Games / Other Toys & Games

♥ 2.5k⬇ 15.7k🖨 239 prints

License: Creative Commons — Attribution — Noncommercial ↗toyprintinplaceshooterdiscfrisbeediscshooter

Print profiles

Disc-Shooter-Print-in-Place (Prusa Slicer).3mfIN STOCKDEFAULT
⏱ 23m · 10 g · 45 × 76 × 11 mm · 1 material(s)
Prints on: A1 mini 0.4PLA
Order this print
Disc-Shooter-Print-in-Place.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Disc.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
4 Disc.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print