Update 1# - I made the top cone have more support from below so it should print more easily, and reinforced the bottom fins.
I modelled this in Blender.
Print Settings
It's printed with a 0.4 mm nozzle, 0.2 mm layer height and no supports.
Don't print lower that 0.2 mm.
There's not a lot of room for infill, but I used 10%.
Other instructions
The model includes a base which is made so that it is stable on the print surface.
It needs to be cut off as shown on the last shot.
There's also a hanger stl in a separate file.
You might also use a 10mm metal bauble hanger like i did on the first shot.
Openwork Christmas Bauble
by frmdbl · original on Printables ↗
Seasonal designs / Winter & Christmas & New Year's
♥ 963⬇ 3.0k🖨 33 prints
Print profiles
OpenworkBaubleHanger_v101.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
OpenworkBauble_v102.stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
OpenworkBaubleNoBase_v103.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print