Description in English below
Update 20.06.25
Kiste ohne Ausnehmungen hinzugefügt
Update 08.05.25
Wieselburger Logos hinzugefügt
Update 07.04.25
Griffe und Stopper für Montage mit Zylinderkopfschrauben M3x14 oder M3x15 Zylinderkopfschrauben und Heat Set Inserts M3x5x4 (Voron) hinzugefügt
Update 05.04.25
Logocutouts der Kiste abermals ein wenig vergrössert
Update 05.02.25
Murauer Logos hinzugefügt
Update 15.01.25
Zwettler Logos hinzugefügt
Update 17.12.24
mir ist aufgefallen, dass die Toleranzen für die Ausschnitte der Logos je nach Druckerkalibrierung verwendeter Düse etc. manchmal zu eng sind.
Daher lade ich die Kiste nochmal mit angepassten vergrösserten Logoausnehmungen hoch.
Update 11.06.24
Zipfer Logos hinzugefügt.
Update 27.03.24
kürzere Griffe (L248mm) passend für Prusa MK Bett hinzugefügt.
Update 18.02.24
Hirter & Budweiser(Czech) Logos hinzugefügt
Sixpack Bierträger zur individuellen Gestaltung
Stützen nur unter den 4 Kistengriffen notwendig- ich habe die Aufmalstützen vom Prusaslicer verwendet.
Druckt die Kiste/Griffe und Stopper abhängig von der Nutzung so stabil als möglich/nötig, immerhin kommen bei voller Befüllung rund 5,3kg Belastung drauf. Vor allem beim Griff+Stoppern viele Perimeter und hohes Infill verwenden.
Griffe und Stopper werden nach dem einfädeln verschraubt oder sicher verstiftet (hierfür kann zb. ein entsprechender Nagel mit einem Lötkolben eingeschmolzen werden)
Tip: druckt vorab eine Miniatur der Kiste (zum Beispiel 33%) mit dem selben Material und den Druckeinstellungen, die ihr für den Druck der vollen Größe verwenden würdet, das braucht nicht viel Zeit und Material, und ihr könnt mögliche Probleme bezüglich
Layerhaftung, Gesamtstabilität etc.
frühzeitig erkennen und korrigieren.
-----------------------------------------------------------------------------
Update 20.06.25
added crate without cutouts
Update 08.05.25
added Wieselburger Logos
Update 07.04.25
Handles and stoppers for mounting with cylinder head screws M3x14 or M3x15 cylinder head screws and Heat Set Inserts M3x5x4 (Voron) added
Update 05.04.25
Logo cut outs of the box again slightly enlarged
Update 05.02.25
added Murauer Logos
Update 15.01.25
added Zwettler Logos
Update 17.12.24
I noticed that the tolerances for the logo cutouts are sometimes too tight depending on the printer calibration, nozzle used, etc.
Therefore, I am uploading the crate again with adjusted, enlarged logo cutouts.
Update 11.06.24
added Zipfer Logos
Update 27.03.24
Added shorter handles (L248mm) suitable for Prusa MK bed
Update 18.02.2024
added Hirter & Budweiser(Czech) Logos
Six-pack beer carrier for individual design
Supports only necessary under the 4 crate handles - I used the painting supports from the Prusaslicer.
Depending on the use, print the crate/handles and stoppers as stably as possible/necessary, after all, when fully filled they will have a load of around 5.3 kg. Use a lot of perimeters and high infill, especially for handles and stoppers.
Handles and stoppers are screwed or securely pinned after insert (for this purpose, for example, a short nail can be melted in with a soldering iron)
tip: pre-print a miniature of the crate (for example 33%) with the same material and print settings that you would use to print the full size, this does not take much time and material, and you can avoid possible problems regarding
Layer adhesion, overall stability etc.
detect and correct early.
Sixpack Bierträger zur individuellen Gestaltung - Six-pack beer carrier for individual design
by 3D Tom · original on Printables ↗
Gadgets / Other Gadgets
♥ 126⬇ 1.1k🖨 15 prints
Print profiles
stopper.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
blank small for long sides 61x35,3x0,65.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
blank big for long sides 138x42,8x0,65.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
blank for short sides 64x59,7x0,65.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Schriftzug Längsseite 138x42,8x1,3.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Schriftzug 2 Längsseite 138x42,8x1,3.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Stiegl Längsseite 61x35,3x1,3.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Stiegl Stirnseite 64x59,7x1,3.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Schriftzug Puntigamer Längsseite 138x42,8x1,3.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Puntigamer Logo Stirnseite 64x59,7x1,95.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Wappen Puntigamer Längsseite 61x35,3x1,95.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Finger long 284mm.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Finger medium 259mm.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
long 282mm.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
medium 262mm.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Gösser Schriftzug Längsseite 138x42,8x1,23.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Gösser Wappen Längsseite 61x35,3x1,3.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Gösser Wappen Stirnseite 64x59,7x1,3.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Hirter Schriftzug 138x42,8x0,85.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Hirter Logo längs 61x35,3x1,25.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Hirter Logo Stirnseite 64x59,7x1,25.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Budweiser long side small.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Budweiser long Side.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Budweiser short side.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
short 248mm.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Finger short 248mm.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Zipfer Schriftzug Längsseite.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Zipfer Krone Längsseite.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Zipfer Schrift, Krone&Banner Stirnseitig.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Zwettler Logos2_0.5Nozzle.3mf
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Zwettler long side2.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Zwettler Logos1_0.5Nozzle.3mf
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Zwettler long side1.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Zwettler short side.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Murauer Logos long side large-gelb-schwarz-rot.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Murauer Logo long side small_Gelb-schwarz-gold-weiss-rot.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Murauer Logos short side-gelb-schwarz-gold-weiss-rot.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Murauer Logos IS 0.25Nozzle_0.07Ultradetail_2h.3mf
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Murauer Logos IS 0.25Nozzle_0.07Ultradetail_2h24m.3mf
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Kiste NRW .stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
long 282mm_9mm_M3.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
long Finger_284mm_9mm_M3.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
medium 262mm_9mm_M3.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
medium Finger_259mm_9mm_M3.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
short 248mm_9mm_M3.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
short Finger_248mm_9mm_M3.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Stopper_M3_HSI.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Wieselburger Logo lang.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Wieselburger Logos.3mf
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Wieselburger Logo klein.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Wieselburger Logo stirn.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
kiste-nrw-coreoneHF0.5-0.32Structural-533,88g-14h13mm_tatsächliches Gewicht_490g.3mf
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Kiste NRW blank.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print