🖨️ Print Shop
Little Sleigh /Kleiner Schlitten , Christmas Decoration

Beautiful little sleigh for decoration of Christmas presents, Advent wreaths, Christmas trees or even for Christmas elf stories, etc... 

Left and right side of the sleigh are identical. However, in case of textured plate it may be nicer to position the sides as shown in above picture, so that the outer sides have the same structure.

Size

  • LxWxH:   approx. 65 x 30 x 15 mm 

Print parameters:

  • Layer height: 0.2
  • Nozzle: 0,4 mm
  • Supports: No
  • Brim: No
  • Material: tested with PLA, but I think PETG should also fit
  • The 3mf files were generated with Bambu Studio
    In case you use other slicers please use the stl files

Post-printing

After printing, the parts can simply be put together by clamping. 
A piece of filament (1,75) can be used as crossbar.

The clamping of the parts should actually be sufficient. If necessary, use a drop of superglue.

The uploaded example is printed with PLA filament in white from “Das Filament”

I would be very happy about a make, a like or a comment!

I wish you a Merry Christmas!

Little Sleigh /Kleiner Schlitten , Christmas Decoration

by _conny_k_ · original on Printables ↗

Seasonal designs / Winter & Christmas & New Year's

♥ 145⬇ 863🖨 9 prints

License: Creative Commons — Attribution — Noncommercial — Share Alike ↗christmaschristmasdecorationchristmastreesleighweihnachtensledweihnachtsdekorationwichtelschlittenchristmastreedecorationchristmaself

Print profiles

  • Rechte Seite.stl

    ⏱ time and weight estimated after preparation · 1 material(s)

    Made to order: we prepare this file when you order, which adds a few minutes before printing starts.

    Prints on: A1 mini 0.4PLA

    Order this print

  • Sitz.stlDEFAULT

    ⏱ time and weight estimated after preparation · 1 material(s)

    Made to order: we prepare this file when you order, which adds a few minutes before printing starts.

    Prints on: A1 mini 0.4PLA

    Order this print

  • Schlitten.3mf

    ⏱ time and weight estimated after preparation · 1 material(s)

    Made to order: we prepare this file when you order, which adds a few minutes before printing starts.

    Prints on: A1 mini 0.4PLA

    Order this print

  • Linke Seite.stl

    ⏱ time and weight estimated after preparation · 1 material(s)

    Made to order: we prepare this file when you order, which adds a few minutes before printing starts.

    Prints on: A1 mini 0.4PLA

    Order this print