Dont forget to post your makes!
I use the following settings to print this model with a hole for hanging:
- Orientation: Top
- Brim: 5mm
- Mode: Vase
- Bottom layers: Enough to get two layers into the spiral, about 40 for 0.3mm or 60 for 0.2mm layer heights. This only costs an additional 2-3 grams of material.
- Cooling: set lowest speed to 3mms
The stl file is scaled to 120mm in height and 58mm in both X and Y dimensions, but the 3mf file is not. You can adjust the scale according to your preference. I have printed them at 12% scale and they worked well.
Spiral Ornament by PRNTR3D - Super Easy Print - Vase Mode
by PRNTR3D · original on Printables ↗
Seasonal designs / Winter & Christmas & New Year's
♥ 1.9k⬇ 7.6k🖨 127 prints
Print profiles
Custom Ornament FULL1.3mf
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Custom Ornament FULL1.stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print