I modeled a small winter village for a lantern lit with tea lights. To create the model please follow the steps below:

Print the top. This can be printed at 0.2 mm layer height with no supports. I would recommend printing in PLA at a low temperature to prevent stringing. I used 190 degrees C for the first layer and 185 degrees C for all other layers in HATCHBOX PLA filament.
Print the base. I recommend 0.3 mm layer height.
Glue the top to the base.

This model was printed on an Anycubic Mega Zero 2.0 with a 0.4 mm nozzle in HATCHBOX PLA filament.

Tiny Winter Village Lantern

Seasonal designs / Winter & Christmas & New Year's

♥ 192⬇ 975🖨 20 prints

Print profiles

Base.STLDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Top.STL
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print