Front bezel and rear case for the 10.1" Raspberry Pi touchscreen sold by pidisplayconsole.com and other similar units. I have seen others that look identical but I don't know brand names.

I printed this using Hatchbox PLA on the Bambu X1C with a Wambam build plate. I used a 5mm brim on the outside. Without this I had a corner lift on an earlier iteration.

Front bezel has holes for brass M3 inserts. 240 x 171mm, it just fits on the X1C sitting square, you may be able to use a smaller bed if rotated. The inserts have to be very straight for the screws to line up.

Mine was assembled with M3 x 16 button head screws. STEP and STL files included.

Touchscreen case for 10.1" Pi console

by mikegalusha · original on Printables ↗

Gadgets / Computers

♥ 37⬇ 1.2k🖨 0 prints

License: Creative Commons — Attribution — Noncommercial — Share Alike ↗raspberrypitouchscreen

Print profiles

touchscreen bezel.stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
touchscreen case rear.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print