The build is straight forward, simply print with your favourite filament. I use a green PLA, but most filaments should be suitable.
The wide openings make it easy to add 3D printed ornaments onto your tree.
- Nozzle: 0.4mm
- Layer height: 0.2mm
- Layer width: 0.5mm
Use all the other settings you normally use for your filament.
The approximate dimensions of the three hooks are:
- Small - 42 x 20 x 2 mm
- Medium - 48 x 25 x 2 mm
- Large - 57 x 27 x 2 mm
They can be made smaller, but it's best to be careful with the changes. I have tested on the large hook:
- X: 90%
- Y: 70%
- Z: 100%
This made for a smaller hook, but still has the strength to be useful.
Christmas Ornament Hook - 3 sizes for all situations
by Katie · original on Printables ↗
Seasonal designs / Winter & Christmas & New Year's
♥ 46⬇ 547🖨 2 prints
Print profiles
Hook Large.stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Hook Medium.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Hook Small.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print