Case for ESP-WROOM-32 ESP32. The lid snaps on without any screws or glue and has openings for pressing the buttons with a paperclip. The base is deep enough to keep the headers on the board, although I de-soldered mine. There is an opening at the back of the case to let wires through for your project.
I also added a taller version of the case in case anyone is interested in using dupont connectors on the headers.
**11/22/2024: Version 2 and narrower version uploaded - Based on feedback in some of the comments, I made some changes to the original design. Basically, I made the standoffs attached to the walls of the case and eliminated the pins at the top, so it's possible to fit the USB C version in the case with the USB C connector that sticks out a bit from the PCB.
I also uploaded a narrower version of the case that fits different versions of the ESP32-WROOM-32 that does not have any holes for standoffs. This fits both micro-USB and USB C versions.
All parts print without supports. I recommend a .2 layer height and a .4 mm nozzle.
ESP-WROOM-32 ESP32 Case
by Tecknishen · original on Printables ↗
Hobby & Makers / Electronics
♥ 164⬇ 2.4k🖨 6 prints
Print profiles
ESP32 Case Base.3mf
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
ESP32 Case Lid.3mf
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
ESP32 Case Base_Tall.3mf
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
ESP32 Case Base_Tallv2.3mf
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
ESP32 Case Lid.3mf
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
ESP32 Case Base_v2.3mf
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
ESP32 Narrow Tall Case.3mfDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
ESP32 Narrow Case.3mf
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
ESP32 Narrow Case Lid.3mf
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print