Compact snowball maker with a hinge. Easy to print and easy to assemble. It has convenient grips to open the mold.
Printing:
I printed this with PLA, 0,2mm layerheight, 3 perimeters, 15% infil. For printing orientation please refer to 3mf file or the video.
Assemble (also see the video):
- Remove parts from the plate.
- Instert Part_B into Part_A.
- Insert bolt.
- Screw on the nut and tighten gently.
- Have fun.
Fine tuning the hinge:
If you will need to fine tune the bolt clearance, just print the bolt and nut again with use of XY scaling! No need to print the main parts again.
Also check out:
Snowball maker - compact
by rorys3D · original on Printables ↗
Seasonal designs / Winter & Christmas & New Year's
♥ 1.3k⬇ 5.5k🖨 79 prints
Print profiles
snowball_maker_compact.3mfDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
nut.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
bolt.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
part_B.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
part_A.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print