It's a simple but super sturdy Playstation 5 (new slim model) wall mount. It utilizes the M3 screw at the bottom of PS5 to secure it on the mount. No need for any additional top part.

Out of the two screws, I screwed one into the stud and the other into a drywall anchor. 

Print settings: 5 wall layers, 5 bottom & top layers, with 40% Gyroid infill.

Hardware: 35mm M3 screw to secure the PS5 to the mount + 2 drywall anchors with at least 2.5 in screws.

Note: If you want to mount the PS5 facing the other way, print the model mirrored on Z axis.