Rock Climbing Crimp Hold 1

Edit 8/26/23: Added another version with an additional screw hole to prevent turning. The hold has never turned on me but in a boulder I'm setting it will be used as a foothold so the extra screw hole is a preventative measure. 

Edit 11/16/23: Fixed dimensions on version with extra screwhole, for #10 screw

Description

Very nice and small crimp with the smallest bit of incut

Hole size is for 5/16-18 bolt with washer and #10 screw, comment if you need a different size

Print with Cura's fuzzy skin experimental setting for texture

Fuzzy skin settings used:

Fuzzy skin thickness: 0.3 (mm)

Fuzzy skin density = 3.0 (1/mm)

Infill should be at least 30%, with at least 4 walls. It's only a small crimp so it doesn't need to be anything crazy unless you will also use it as a foothold.

Dimensions in drawing are in inches.

Enjoy!

Category: Sport & Outdoors