The original author made a nice lantern!
The author i remix from did some great work for with his 5mm conversion.
Now it is my turn to publish my remix. 

What did i change?

• Bigger hole for candle (37.5mm)
• smaller outer-ring size to save filament (72mm)
• hollow base to apply glue to scene-layers
• lid to close the hollow bottom up
• merged outer layer (one part instead of two) for nicer looks (!!!)
   

The large outer layer:

I wanted a nice outer layer without the visual-break the connection between outer layer part A and B creates, so i simply merged the meshes of the outer layer together!

The new merged outer layers have these dimensions:

Width: 217.11mm
Height: 70.80mm
Thickness: 0.4mm
Filament used: 3.42g

There are two versions of the outer layer available:

My bed is textured, so i haven them face down. The real prints look like this:
 

Print-Settings

I use default BambuStudio 0.1mm preset.

The Base

The base got a rework too, seeing that other remixes put a hole for the candle in.
My version features a 37.5mm hole for the candle, which is pretty much the biggest hole you can put into the part. My slicer puts one wall between hole and the first insert for the most inner layer.
In addition, the bottom of the base is accessible (hollow) to glue the layer-insert to the base.

The lid, the base and both being fitted together in one picture:

Dimensions:

Base-diameter: 72mm
Candle-hole diameter: 37.5mm
Height: 5mm
Filament used: 5.77g

Print-Settings

I use default BambuStudio 0.2mm preset with these changes:

• layer height: 0.25mm
• wall generator: Arachne (you need this for the lid to fit)
• Top surface & Internal infill patterns: Archimedean Chords
• Bottom surface pattern: Concentric

The Lid

If you want to hide the ugly mess under the base, a lid can be supplied. The bottom of the base has a fitting for the lid, which of course, can also be glued on. But they hold without glue just fine.

Dimensions:

Lid-diameter: 70mm (16mm radius)
Candle-hole diameter: 38mm
Height: 0.75mm
Filament used: 2.48g

Print-Settings

I use default Bambustudio 0.2mm preset with these changes:

• layer height: 0.25mm
• wall generator: Arachne
• Top surface & Internal infill patterns: Archimedean Chords
• Bottom surface pattern: Concentric