This is a mount that attaches a Vive Tracker/Tundra Tracker to your Quest 3.
Model based on the 3D scan by Hammer:
https://grabcad.com/library/meta-quest-3-3d-scan-left-controller-headset-head-strap-mounts-1
Tested with Vive Tracker 3.0 and Tundra Tracker.
It reuses the screw and pin stls of the Pico4 Vive3.0 Tundra tracker mount by Val's Virtuals.
To attach the tracker mount to the Quest 3, first attached the tracker to the mount using printed screws and pins. Use 3M VHB tape for attachment of the assembly. Make sure the contact surfaces are clean for a good result.
All the parts can be printed without supports. Test prints printed with PLA-CF.
Quest 3 Vive Tracker/Tundra Tracker Mount
by cucumberworks · original on Printables ↗
Gadgets / Other Gadgets
♥ 57⬇ 1.4k🖨 2 prints
Print profiles
dog.stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
quarter 20 screw.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Q3TrackerMount.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print