Print-in-place, collapsible horns for cosplay. Â Collapsed, these are about 80mm tall with a base of around 90mm in diameter for easy transportation. Â Each segment can be oriented independently to give a variety of different looks. Â There are places for four 8mm magnets in the base as well as slots for adding elastic or other straps, or just cut a hole and use the base flange to hold it in place.
I recommend adding “fuzzy skin” (Prusa Slicer) or the equivalent in other slicers to give the outer texture shown in the images.  The examples above were printed with a 0.6mm nozzle, 0.4mm layer height (to go along with the fuzzy skin for a rough, organic look), 4 perimeters, zero percent infill and no supports.
Note that the pieces are held together by friction, so paint will likely rub off of the surface with time and usage.
2023-12-08: Added revised 65mm horn with a base that should conform better to the shape of your head. Â The revised version also stays together better when collapsed so the individual segments won't (usually) come apart.
2024-06-08: Adding STL version of 65mm.
Collapsible horns
by joebean01 · original on Printables ↗
Costumes & Accessories / Cosplay & Costumes in general
♥ 343⬇ 726🖨 6 prints
Print profiles
Collapsible horn pair.3mfDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Collapsible Horn.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Base for 65 mm horn.3mf
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Horn - 65mm.3mf
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Base for 65 mm horn.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Horn - 65mm.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print