This is a rework of my own model from thingiverse (from 2012).
“cyclone to catch the spray while purging/cleaning an airbrush.”
There may be some sputtering especially with airbrush nozzles bigger than 0.2mm.
Prints without supports, a filament/profile with no stringing is recommended. There is now no easy way to remove any stringing from the internal cavity.
Version 2.1:
- Smaller diameter, this seems to be better
- Added a funnel on the top
- Tested with an airbrush with 0.4mm nozzle, 2.5bar and plain water. This filters out ~98% of the water.
Airbrush cyclone
by Gerhard · original on Printables ↗
Art & Design / Other Art & Designs
♥ 460⬇ 1.8k🖨 26 prints
Print profiles
cyclone.stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
cyclone_2.1.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print