Stretchy, Springy Candy Corn

I included 2 STL files of this Candy Corn. One file has “more spacing” between the layers so they are easier to separate. But I also included a file with “less spacing” which is a little more work to separate. I recommend starting with the “more spacing” file:)  

The reason I included both is I don't want anyone to get frustrated trying to separate the layers BUT I really like the finished play of the one with the “less spacing”.  It has a nice bounce 😂 (Separating the narrow layers on this one feels a little more like removing weak supports.) Gently separate the layers of the Candy Corn with “more spacing” with your fingers. For the Candy Corn with “less spacing”, use a non-sharp object (butter knife) to carefully separate:)

3D PRINTING SETTINGS

Layer Height 0.2mm

PLA works great 

No Supports needed.

15-20% Infill 

Dimensions: 2.25in. x 2.25in. x 1.5in.

Schedule a pause print to change filament color at approx. layer height 17mm and 37mm (see photo).

Have fun printing:)