Set of various Shelves for HSW Honeycomb Wall

Set of 5 different style Shelves for Honeycomb Storage wall.
Shelves are 100-120mm wide and 50-60mm deep.

Made specially for HSW or Honeycomb Storage wall with Hex wall fixings. Depending on Your printer it is possible that a very little sanding will be needed on fixings if they will very hard fit as I made them to be in place strong and for my Bambu X1 printer they fit just perfectly.

Enjoy

You can Buy me a coffee if You feel good doing so :) (And very big Thank You For interest in my work)
https://www.buymeacoffee.com/warlogh

Set of various Shelves for HSW Honeycomb Wall

by Warlogh · original on Printables ↗

Hobby & Makers / Organizers

♥ 434⬇ 2.5k🖨 23 prints

License: Creative Commons — Attribution — Noncommercial ↗shelfhoneycombshelvingshelvesorganizeshelvehoneycombstoragewallhoneycombwallhsw

Print profiles

120mm plate.stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Square_Shelf.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Chamfered_Shelf.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Wedged_Shelf.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Submerged_Plate.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print