I printed it with hatchbox transparent green pla and had to dry it out for 8 hours to get the moisture out. You can print it in any of color you want and it does not need to be transparent, as the walls are printed thin enough that it will still glow without transparent material. The stem and head band are printed in bambu black pla basic. For the balloon light I used the green one found here, https://a.co/d/bkQjGnI.

Assembly is easy as all the parts just slide together. Slide the stem into the headband, it is a tight fit so it does not come loose. If it’s too tight a little sandpaper or a knife will make quick work if it. Place the light in the stem before inserting it into the plumbob.

I included the .3mf file with my print setting on my Bambu printer. These are transparent setting on the plumbob and strength on the headband and stem. You can significantly speed up the print time by printing the plumbob at standard settings but it may not look as good.

If you have another printer, print the plumbob solid by increasing walls and use  a bream. Use standard or strength settings for headband. No supports needed

If you are interested in commercial sales please contact me at [email protected]