Bank card length beard / hair comb that will easly fit in a wallet or a pocket
83 x 25 x 1,6 mm
It's in 3 versions:
- Fine-tooth
- Wide-tooth
- mixed
All with additional flat models
1,6mm vs 1mm high
---
Made in Blender 3D
---
Update 28 X 2023
Removed 'c47_3d' from models and cleaned them up a little
License is now just 'Attribution - Share Alike'
---
Printing tips:
Made for 0.4mm nozzle
Wide-tooth version can be printed with 0.6mm nozzle (teeth will be slightly cleaner than with 0.4)
The smaller layer height the better (better looking and little more durable) but you can print even with 0.2mm
You can resize the model in Z-axis for more strength
You can also print wide-tooth in 66% size with 0.4mm nozzle for even smaller comb
I would just recommend to leave 100% on Z-axis
You would get a 55 x 16 mm comb
I printed it in ABS, PET-G should work fine too
PLA will work but may break faster (the more moisture in filament the more brittle it gets)
---
Small Beard / Hair Comb
by C47_3d · original on Printables ↗
Fashion / Other Fashion Accessories
♥ 36⬇ 534🖨 7 prints
Print profiles
Comb_v2_wide-tooth.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Comb_v2_wide-tooth_flat.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Comb_v2_fine-tooth.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Comb_v2_mixed-tooth_flat.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Comb_v2_mixed-tooth.stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Comb_v2_fine-tooth_flat.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print