Minted: BoboVR M2 to M3 - Quest 3 - Printable retrofit

I remixed a remix
Changes from original
- Hole moved to middle (More wiggle room can bring closer to face)
- Hole raised up closer to the edge (Left and right side are now provided). Increases distance between Q3 arm and the BOBO band
- Groove added incase you really need to push it in. (For storage or getting super close)
- Reduced the thickness of the circle clip mechanism. To allow it to bend more. Should be less brittle and allow PLA to be used

I still recommend scaling it up to 101-102.5% (FOR ALL PARTS)
Test this out by printing out an arm and test fitting it (Compare it to the original)

Other notes:

Make sure to remove the bobo strap before tinkering around with it
Have pry tools ready for the White shroud/facades
Use a small flat head to pry the metal looking stickers, and use them for later/reapply them (No need for new glue, if kept dust free)

Changelog

3/12/23
- Thickened arms for durability

- Reduced insert height, to be have more friction with the rubber O ring

Note: I now use 101% scale up

Minted: BoboVR M2 to M3 - Quest 3 - Printable retrofit

by Rosdayle · original on Printables ↗

Gadgets / Virtual Reality

♥ 45⬇ 512🖨 6 prints

License: Creative Commons — Attribution — Noncommercial ↗bobovr

Print profiles

Oldv1 x2 Part2_insert_Minted.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Oldv1 x1 Part1_RIGHT_armgrabber-Minted.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Oldv1 x1 Part1_LEFT_armgrabber-Minted.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Part, Insert v2.stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Bobo Arm Left V2.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Bobo Arm Right V2.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print