****See updated V2!

https://www.printables.com/model/1548234-bow-tree-hanger-for-hunting-v2

Hello!

I use a homemade HYS style strap to hand my backpack and bow from a tree while saddle hunting. I wanted a simple hook to hold my bow secure on the tree but still allow easy grabbing of the bow. Other hunting brands have similar products but this is of my design. Large enough to work on all compound bows and traditional if you so choose. I use a 1in width strap but should work on a ¾" strap too. 

Test in a tree on the ground before you trust it in the air!

Hardware:

1x QTY 5/16" - 18 X 1.75" LG SS socket head screw 

1x QTY 5/16" - 18 SS locking nut

Printing:

Material: PETG or ASA or other UV resistant filament, I use Atomic PETG + CF which I love!

Layer Height: 0.2mm

Walls: 6

Top and Bottom Layer: 6

Infill: I did 100% with lines pattern, you could probably do 50% but I haven't tested this

Cooling: 0% for best layer adhesion

Supports: None for hook, on for hanger to support holes and strap slot