Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Grey
At layer #13 (1.12mm) swap to Silver ….(gold)
At layer #18 (1.52mm) swap to White for the rest.
no frame needed for this one can swap the silver for gold if you want :)
cross
by L33 · original on Printables ↗
Art & Design / Other Art & Designs
♥ 69⬇ 805🖨 0 prints
Print profiles
cross_Front_105x150.stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print