Hey Guys,
Here are my Creality K1/ K1C/ K1 Max/ Orca Slicer, Quality, Speed, and Stealth Profiles for 0.4

Tested on K1, K1 Max, K1C Hotends. (Standard, CHT, Unicorn)

If you are using the RetroGlide Gantry Mod 

You can find my latest profiles for free on my Patreon here.

Join the Patreon for my latest Profiles and mods, or if you just want to be a part of the community. 

------------------------------------------------------------------------------------------------

Disclaimer:

If your prints are bad still

Remember there is no one profile for all printers.

Please run the Orca Filament Calibrations 

and update the profiles accordingly. 

This will tune the profiles to your printer and the filament you are using.

------------------------------------------------------------------------------------------------

------------------------------------------------------------------------------------------------

just for fun a Super Speed Profile that uses the Full 20k accelerations. 

If you need 0.6, adjust the layer heights and width accordingly. 

For a 0.6 Nozzle, Change the following:

• Choose a Standard profile

• 0.2 to 0.35 for layer heights

• 0.6 to 0.8 for Layer Widths 

These are my all-new profiles that have been completely overhauled and work with the stock printer profiles added to Orca
All you need to do is:

1. Choose printer

2. Choose a filament

3. Pick a profile

4. Print

it's that easy!

To load them,

1. Add your Printer ie: K1 or K1 Max stock profiles.

2. Then Go to: File > Import > Import Configs > Search for files and confirm.

3. Make sure you have the correct printer selected in the drop-down menu, once you install them. or they won't show up. They Should have Retro D in the title.

The new profiles and Printer will be added to your dropdown menus.

New Configs include:

10 Material Profiles

10 Printing Profiles to meet your needs in 99% of situations. 

Note: 

If you still are not seeing the results you want, 

remember these are for the general population and will need further fine tuning to be perfect for your printer and setup. 
try using the orca slicer's built-in calibration tools. 

Just start from the top, work your way down the list, and update the profiles accordingly.

If you want a really good calibration cube that prints pretty fast to test your profiles quickly, please see the link added below for the Deathly Hallows calibration cube. 

Enjoy!

The newest release of Orca Slicer can be found here > https://github.com/SoftFever/OrcaSlicer/releases 

Testing Cube:

Harry Potter Calibration Cube with great features. 

https://www.printables.com/model/650696-deathly-hallows-calibration-cube  

-----------------------------------------------------------------------------------------------------

K1 Series Mods 
If you want the same Hotend Duct Shroud and other upgrades I'm currently using and would like to support my work, you can find them HERE. 

----------------------------------------------------------------------------------------------

Build Plate Guides:

I recently ordered a new build plate that did not match the original guide screws. 

so I made them future-proof by making them universal to fit all build plates I might decide to get. 

you will need:

•  2x M3*8 screws to insert from the bottom to keep it nice and flush. 
  Printed in ABS using my Orca Slicer Profiles.