You'll have to excuse the part names, I didn't know the correct technical term for most of them…

I made this model as the others available online weren't all split by color and were over complicated in the number of parts (some containig 50+ parts). I've managed to get this model down to just 17 parts whilst still maintaining a high level of detail.

I have split the parts by color for those who wish to print this from colored filament like myself.

I have cut out holes in some areas of the model where a 5mm M3 Hex screw (You'll need 26 of these) can be inserted for realistic effect, you can make your own if you don't have any on hand. I also made the mag removable with 4 slots for some 6mm x 3mm N45 magnets to be inserted (Not essential).

Rifle is full scale with a length is 695mm. I've also included the files for two orange caps to go on the ends of the barrels.

UPDATE (04/10/23)

Rifle under barrel updated with a stopper to prevent the pump sliding off.

Updated version of the “Top Rail” has been REMOVED as there was an error with the STL after running a test print. If you have already printed this you may need to do some sanding down on the blaster breach to get it to fit. I'll have an updated model soon…

UPDATE (05/10/23)

The under barrel now has a stopper on the end (as it should) to prevent the pump just falling straight off. I recommend splitting this in half and printing as two pieces. Put the pump in place before gluing the two together and use the pump as a guidance to make sure everything lines up.

The top rail has been split into two files for easier printing and assembly. Some of the angles and fillets have been increased so that less support will be needed. I have added some further details and also cut out some holes on each end so that they can be lined up by using some filament as inserts when gluing together. MAKE SURE YOU INSERT THE BREACH BEFORE GLUING THE TWO RAIL PARTS TOGETHER.

The mag/clip has been reduced in size for a better fit.

The rifle breach has been adjusted to fit the new rail design.

Everything has been test printed and fits together with no issues.#

The original files have been removed to avoid confusion.

Aliens M41A Pulse Rifle

by Andrew Williams · original on Printables ↗

Costumes & Accessories / Props

♥ 1.2k⬇ 3.4k🖨 23 prints

License: Creative Commons — Attribution — Noncommercial ↗

Print profiles

Aliens Pulse Rifle Orange Caps.stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Aliens Pulse Rifle Trigger Detail.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Aliens Pulse Rifle Ammo Count.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Aliens Pulse Rifle Mag Housing.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Aliens Pulse Rifle Top Barrel.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Aliens Pulse Rifle Grip.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Aliens Pulse Rifle Loading Pull.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Aliens Pulse Rifle Pump.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Aliens Pulse Rifle Mag.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Aliens Pulse Rifle Top Barrel Casing.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Aliens Pulse Rifle Stock Back.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Aliens Pulse Rifle Under Barrel Cap.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Aliens Pulse Rifle Bolt (x4).stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Aliens Pulse Rifle Stock.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Aliens Pulse Rifle Under Barrel.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Aliens Pulse Rifle Mag Inner (NEW).stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Aliens Pulse Rifle Breach (NEW).stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Aliens Pulse Rifle Top Rail Split 2 (NEW).stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Aliens Pulse Rifle Top Rail Split 1 (NEW).stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Aliens Pulse Rifle Assembly.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Aliens Pulse Rifle Under Barrel SPLIT.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print