A TWO COLOR PLA printed earring set printed with a .6 nozzle. Entire earring from head to bottom of tail is approximately 50mm as printed. Get a jewelry kit from your favorite place and assemble… just in time for the Halloween season. 

This cat in the pictures was printed with regular black PLA and has a color change at around layer 10. First layer of the new color (glow in the dark white) starts at layer 11. This only works with .2 layers. I used ironing to help control the infill lines. The tail is fairly thin, some of you may need to add a few lines of brim to keep lifting from happening. 

V2 update: Made slightly taller and slightly skinnier. Widened some “Bones” parts to print nicer on a .6 nozzle. Reduced height to save filament and time. 

Feel free to print, but PLEASE do not sell these for commercial purposes. I put the design effort into these to share, not to be abused.