Basically prints without support and brim, but I'd recommend a 5-10mm brim (as in the .3mf file). 0.6mm nozzle and 0.25mm layer height is fine, although you might reduce it for a higher quality print. Do yourself a favour and use PETG or similar instead of PLA for a longer lasting model.
Fits models v7 and later.
First make wins a coffee. :-)
Dyson Flat Nozzle 100x4mm (v7 and later)
by thomers · original on Printables ↗
Household / Other House Equipment
♥ 948⬇ 3.5k🖨 34 prints
Print profiles
Dyson_Flat_Nozzle_100x4mm_v7.stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Dyson_Flat_Nozzle_100x4mm_v7.3mf
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print