An easy FDM printable stand to hold your PS5 controller in the look of a PS5.

There are already some models out there but they don't quite hold the controller as snug as I'd like plus the printing or the assembly were often times a hazzle.

Hence I made my own version that is easy to print and easy to assemble and relatively fast to print.

Instruction

1. Download the .STL file and open it in your prefered slicer
    
2. Slice the model as opened and then print it
   
   
    
3. For the base make sure to set your seams to «rear» or «paint» it for a better look
   
   
    
4. After printing the parts simply clip the panels into the base. They should hold firmly through friction.
   
   Note that your 3D printer needs to be calibrated well.
   
    

Specification

• Base: 40mm x 60mm
• Total Height: 69mm

Print Settings

• Infill: Gyroid 10-15%
• Perimeters: 2-3
• Layer height: 0.2mm - 0.3mm
• Seam: Rear
• Supports: none