We all know the ships in a bottle, but how do you put a (hard) printed message or even a 3D model inside a glass bottle?

It can (almost always) be removed similar to the way it came in.

Manual how to do this yourself is shared under [Other files] as PDF!

Please give a like if you enjoyed the shared solution. Prusapoint are not given for downloads alone, I also need likes…  Many thanks! 

Included as a model is a card with the message I put in the bottle, and a blank card where you can add your own text.

Print in PLA and use 2 contrasting colors for clear text.

Set Fill Angle to 0° !!  (to prevent twisting)

Have fun!

The bottle I used had a bottle neck inside of Ø18,9mm

p.s. you're not limited to messages alone! If your print is thin enough you can put anything inside! See examples below.

__________________________________________________________________________________________________

Rings in Bottle 

Rings are Ø40mm and bottle neck inside is Ø21mm

Models: Low poly ring + Organic ring + Emergency wedding ring

All scaled about 140-150%

Printed in PLA

__________________________________________________________________________________________________

Gekko in a Bottle

Bottle neck inside is Ø15,5mm

Gekko Size: 75,6 x 49,85 x 10,6mm !!!

Model: Geko

Printed at 60% in PLA

It was a very tight fit and I don't think he will ever come out again!