Horizontal Magsafe and AppleWatch Stand
This is a combined MagSafe iPhone and AppleWatch charging Stand that holds the phone horizontally to take advantage of the new StandBy mode in iOS 17.
All cable cutouts fit both USB-A and USB-C cables and all models are compatible with all iPhones that have MagSafe and all AppleWatch models.
Different versions of this design by me can be differentiated by the version number (just in front of the "M") while different suffixes indicate different types of the model at the end of the file name.
Available design variants:
Four variants of V5 are available, and for each variant small and large bezel sizes are available, each in their own folder with .stp and .stl files:
- OriginalDesign: This is my original compact design, only allowing the phone to be held horizontally
- VerticalPhone: This version is a bit longer and allows the phone to be held vertically, adding a third camera bump cutout for this position (requested by DonWhiteside on Thingiverse).
- 2xMagsafe_noWatch: This is a version that replaces the Apple Watch charging spot with a cutout for a second MagSafe puck, e.g for charging your AirPods (requested by m_reiner).
- OnlyPhone: This is a version that removes the Apple Watch charging spot, not replacing it with anything if you don't need it (also requested by m_reiner).
For all 5 designs versions with 0.2mm tolerances around the MagSafe-Puck can be found in the folders. I reccomend the 0.2mm Versions, but you can use the 0.4mm tolerance Versions in the "Version-05_04mmTolerances" folder if you expect more shrinkage on your Filament/Printer.
Baseplates
If you are planning on permanently installing your chargers in the model, you can print one of the baseplates in the V05_Baseplates folder to glue to the bottom of the model. This gives you a flat bottom surface so that your cables are more protected and so that the base has some more weight and was suggested by David Jones. Use the rectangular baseplate for the VerticalPhone variant and the square baseplate for all others.
The baseplates are provided with a thickness of 10mm, so that you can easily scale them up or down in your slicer by adjusting the z-scale (important: turn off uniform scaling to avoid changing the x- and y-dimensions.
If you wish to make your own baseplate, the dimensions are 80 by 80mm (or 80 by 110 for the rectangular one) and the corner radius is 8mm.
Update History
Update 17.10.2023
SmallBezel versions of each of the original four variants are now available.
Update 05.10.2023
Version 05 is out! This Update adds a retaining mechanism in the cable channels on the bottom of all models.
You need a bit of force to get the cables in, but it is easily possible and leads to secure retention in the channels, preventing them from sticking out.
The AppleWatch Charger mount is also 3mm taller to allow for AppleWatchUltras with cases to better fit.
I also added a new version of the design: "SmallBezels". This version has smaller bezels around the MagSafe Puck for those wishing for a more minimalistic design. Due to the smaller bezel, the cable for the MagSafe-Puck is no longer fully contained in the model.
For all 5 designs versions with 0.2 and 0.4mm tolerances around the MagSafe-Puck can still be found in the folders.
V3 and V4 can now be found in folders below all the new files.
Update 28.09.2023
I've replaced all files and with versions that have a 0.2mm smaller tolerance on the MagSafe ring (now only 0.2mm bigger than the puck instead of 0.4mm), as the fit wasn't quite as snug as I wanted (I guess my new X1C is just too dimensionally accurate compared to my older Ender 3 Pro).
All the older models can now be found in the 0.4mmTolerances Folder below the new ones. They can be distinguished by the last suffix “04mmTol”, compared to the new models with “02mmTol”.
Update 25.09.2023
Version 04 is out! This is a slight redesign of the edges, while also consolidating the naming scheme.
Miscellaneous
I printed this in GlowInTheDark Blue PLA which looks very nice at night.
If you want any other file types for a remix or something else just leave a comment and I'll do my best to provide them.
Discontinued Versions in V3
LargerTolerances
The LargerTolerances version has increased tolerances (+0.4mm) for the cable holes and charging-puck-slots. Use this version if you are using a filament that has higher than usual shrinkage after printing. I added this version after a request from MrBitz.
If you need one of the newer versions with larger tolerances please leave a comment and I'll try to provide it as fast as possible :)
MoreVertical
The MoreVertical Version shrinks the circle around the magsafe Puck by 3.2% and increases the phone's angle by 5 Degrees. It was requested by ksalak, and I do not reccomend it above the other versions, as the wall around the USB-C Cable channel gets down to a single wall width due to these changes.
Horizontal iPhone Magsafe (StandBy) & AppleWatch Stand
by jpbruce · original on Printables ↗
Gadgets / Portable Devices
♥ 160⬇ 1.1k🖨 9 prints
Print profiles
MSS_001_03_M_MagsafeAppleWatchStand_VerticalPhone.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
MSS_001_03_M_MagsafeAppleWatchStand_Iphone15_largerTolerances.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
notReccomended_MSS_001_03_M_MagsafeAppleWatchStand_moreVertical.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
MSS_001_03_M_MagsafeAppleWatchStand_Iphone15.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
MSS_001_04_M_MagsafeAppleWatchStand_04mmTol.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
MSS_001_04_M_MagsafeAppleWatchStand_VerticalPhone_04mmTol.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
MSS_001_04_M_MagsafeAppleWatchStand_2xMagsafeNoWatch_04mmTol.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
MSS_001_04_M_MagsafeAppleWatchStand_onlyPhone_04mmTol.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
MSS_001_04_M_MagsafeAppleWatchStand_02mmTol.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
MSS_001_04_M_MagsafeAppleWatchStand_VerticalPhone_02mmTol.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
MSS_001_04_M_MagsafeAppleWatchStand_onlyPhone_02mmTol.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
MSS_001_04_M_MagsafeAppleWatchStand_2xMagsafeNoWatch_02mmTol.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
MSS_001_05_M_MagsafeAppleWatchStand_02mmTol.stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
MSS_001_05_M_MagsafeAppleWatchStand_04mmTol.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
MSS_001_05_M_MagsafeAppleWatchStand_VerticalPhone_02mmTol.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
MSS_001_05_M_MagsafeAppleWatchStand_VerticalPhone_04mmTol.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
MSS_001_05_M_MagsafeAppleWatchStand_onlyPhone_02mmTol.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
MSS_001_05_M_MagsafeAppleWatchStand_onlyPhone_04mmTol.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
MSS_001_05_M_MagsafeAppleWatchStand_smallBezels_02mmTol.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
MSS_001_05_M_MagsafeAppleWatchStand_smallBezels_04mmTol.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
MSS_003_05_M_MagsafeAppleWatchStand_BaseplateRectangle.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
MSS_003_05_M_MagsafeAppleWatchStand_BaseplateSquare.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
MSS_001_05_M_MagsafeAppleWatchStand_smallBezels_2xMagsafeNoWatch_02mmTol.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
MSS_001_05_M_MagsafeAppleWatchStand_smallBezels_2xMagsafeNoWatch_04mmTol.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
MSS_001_05_M_MagsafeAppleWatchStand_2xMagsafeNoWatch_02mmTol.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
MSS_001_05_M_MagsafeAppleWatchStand_2xMagsafeNoWatch_04mmTol.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
MSS_001_05_M_MagsafeAppleWatchStand_smallBezels_VerticalPhone_02mmTol.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
MSS_001_05_M_MagsafeAppleWatchStand_smallBezels_onlyPhone_02mmTol.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
MSS_001_05_M_MagsafeAppleWatchStand_smallBezels_onlyPhone_04mmTol.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
MSS_001_05_M_MagsafeAppleWatchStand_smallBezels_VerticalPhone_04mmTol.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print