I created this suspended hand artwork using bridges for the strings. You don't need any supports.
It prints in 0.2mm layer height and wall generator set to Arachne in Bambu Studio.
In Cura or PrusaSlicer you need to select Print Thin Walls to be sure to see the lines
I also added the STL of the strings separated from the rest to let you print them in multiple colors.
EDIT :
The easiest way to print in multicolor is to use the full model and apply the color you want for the strings on the entire model and then apply the other colors to the structure and the hand.
I printed it with a Bambu lab P1S using Polyterra PLA+ Yellow
Suspended Hand
by STomHacks · original on Printables ↗
Art & Design / Other Art & Designs
♥ 4.3k⬇ 20.1k🖨 195 prints
Print profiles
SuspendedHand.stlIN STOCKDEFAULT
⏱ 3h 52m · 97 g · 109 × 95 × 71 mm · 1 material(s)
Prints on: A1 mini 0.4PLA
Order this print
StringsOnly.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
SuspendedHand_withoutStrings.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print