Garmin Edge / Wahoo mount for Rose Xlite bike with aero handlebar

v2:

Top surface is flat now so it can be easier to print upside down
sturdier constrcution through softer radii
Original Garmin and Wahoo mounts can be used with screw holes, mounts will fit without protruding

Update: Wahoo compatible model uploaded. To be tested since I only changed the orientation of the Garmin mount by 90°. Feedback appreciated!

Since there is only one crappy overpriced Garmin Edge mount from Rose that fits their Xlite aero bar I designed my own. I use the Edge 830 and haven't tested it with bigger models yet.

Weight with 20% infill: 16 g

Total weight with two M5 x 20 screws + washer: 25 g

Layer height: 0.20mm

Infill: 20 %

Wall loops: 4

I recommend printing it in the oriantation that I defined in the stl and use supports. This ensures a good quality fit of the mount.

Garmin Edge / Wahoo mount for Rose Xlite bike with aero handlebar

by chaoz · original on Printables ↗

Sports & Outdoor / Outdoor Sports

♥ 51⬇ 1.1k🖨 3 prints

License: Creative Commons — Attribution — Noncommercial — Share Alike ↗mountbikemountcomputerrosebikehandlebarmountaerobarxlite

Print profiles

Garmin Mount Rose Xlite.stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Wahoo Mount Rose Xlite.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
For original mounts v2.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print