A high bypass fan inspired by Rolls-Royce's Trent series turbofans. The fan blades print separately from the disk and are designed to slide in, just like a real fan. The blades can stand up on their own, and the whole fan can also balance on the blade tips as shown in the first picture. This was a totally unintentional bonus feature and would've been difficult to design for. The white spiral stripe is printed flat and glued onto the black spinner cone. If the stripe is too rigid, I recommend printing it with fewer layers (so it's thinner), or softening it with a heat gun or hot water, or printing it with flexible filament.
The clearances and gaps between the parts are as optimized as I could get them, so that parts aren't too tight or too loose. Of course, results will vary depending on your printer and print settings. I uploaded 2 extra versions of the fan blades with more clearance.
Be careful about where the slicer assigns the layers start seam, especially for the fan blades - I recommend placing the seam at the fan blades' trailing edge. Enjoy!
For source files, I uploaded this to GrabCad as well: https://grabcad.com/library/3d-printable-high-bypass-fan-1
Print Settings
Printer Brand:
MakerGear
Printer:
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
.15mm
Infill:
15%
Notes:
Printed using Hatchbox PLA. I didn't need rafts on anything, but I did have brims on the fan blades and annulus fillers. Fan blades don't require supports.
How I Designed This
Designed using pictures. Blueprints and drawings from engine manufacturers are never publicly available for obvious reasons.
Category: EngineeringHigh Bypass Jet Engine Fan
by CATIAV5FTW · original on Printables ↗
Learning / Engineering
♥ 293⬇ 2.2k🖨 7 prints
Print profiles
single_fan_blade.stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Spinner.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
single_fan_blade_.006in_extra_clearance.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Annulus_Filler.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Stripe.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Tip.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Disk_Attach.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Disk.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Disk_-_no_internal_supports.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
single_fan_blade_.003in_extra_clearance.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print