Here is the full set of 6U drawers. I have also included a reduced filament hex model which is the one I have personally verified. It still fits with Walter's system, its just taller!
Unfortunately I primarily use ABS so experienced extreme warping even with glue and sticking the build-plate down with Kapton tape, so I would advise against using this material. I used the original handles, scaled in XY by 120% and it seemed to be a nice press fit, however I still bungled one of them.
I will continue to iterate on this design for a while; I have a few more adaptations of the shell and drawers if anyone is interested as well.
Printing recommendations:
PLA or PETG
Back on the build-plate
0.16mm layers
15-20% cubic infill
Infill combination ON
Normal supports at 45deg
My print settings (Which I don't recommend):
eSun ABS+ White and Bambu Lab ASA Blue
0.16mm layers
20% cubic infill
Infil combination ON
Normal supports at 45deg
5mm brim; Object gap 0.1mm
6U Gridfinity Modular Drawer System
by Isambard · original on Printables ↗
Hobby & Makers / Organizers
♥ 241⬇ 1.2k🖨 8 prints
Print profiles
6U Gridfinity Drawer Box A.stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
6U Gridfinity Drawer B.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Gridfinity Drawer Box Hex A.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print