Please leave a “like” is appropriate, THX

NOW WITH MK4 GCODE!!!

Print the Face Mask and Crown separately, as are the back grill, top and bottom ear pieces.

The facemask takes 34+ hours with MK3S/+ Nozzle 0.4

The Crown takes about the same, but does not need any supports

23+ with hours with 0.6

But only 15+ with MK4 with input shaper and pressure advance (Firmware 5.0.0 RC1)

If not using MK4, be sure to to set brim (skirt) to 0 with no brim.

Support needs to be Snug (Organic extends to far to edges)

Printed in PLA (Sunlu Silk at 185/183 nozzle to minimize stringing) with 66 Bed with glue.

Attached the lower ears flaps first (to Face Mask) as the top overlaps the bottom.

Made a templet for the window tint (eyes & Mouth) and attached to mask BEFORE joining the Mask & Crown.

Used a fast setting adhesive to join the two halves.

Had min post production cleanup, mainly used fingernails to scrap imperfections.

Attached the upper before gluing the Face Mask & Crown together (the ears help with the alignment.

Mandolarian Helmet for Prusa MK4/MK3S/MK3S+ COMPLETE WITH MK4 GCODE

Costumes & Accessories / Cosplay & Costumes in general

♥ 75⬇ 638🖨 3 prints

Print profiles

BottomEars 46p5x102.3mfDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
TopEars 57p5x52p25.3mf
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Mand Helmet245x205_FaceMask.3mf
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Mand Helmet 245x205 Crown.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
245x205_BCKGRILL_.3mf
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print