UPDATE:  7/22/2025  YETI Colster/Koozie model added in the files section for standard diameter cans.  If you use PCTG filament only 2 perimeters and 15% infill are necessary, no box modifier.  Enjoy! 

UPDATE:  7/19/2024  Skinny can model added in the files section, enjoy!

 Here is your new SUP drink holder.  It is designed for a standard 12 oz/ 355ml diameter can.  I have included the step file to make remixing easier, so go sick!  The design is meant to thread into the existing bungee system on your SUP.  Lots of bungee = Lots of drinks (Choose your own adventure!)

Adding a box modifier in slicer as shown, and changing the infill density of the box to 100% will greatly increase durability.  I also use 4 perimeters to increase wall strength.  

Enjoy!