Canopy for the Voron 2.4. Will need to be printed with supports, corner for fan will need to be mirrored for one side. Will work with 250, 300, & 350. Will use the standard acrylic top panel. Spots for 60mm fans with spacing for charcoal fume filter doubled up, need m3 heat inserts(same as Voron BOM). Spots to mount extra hardware in the middle pieces and front corner, for led strips, camera, etc, need m3 heat inserts(same as Voron BOM). Logo goes all the way through or you can print out and glue in for to block hole or different color for logo.
I have updated the Daylight on a Stick XXL mount, not sure if will work with the regular size, now has spots to zip tie wires. Also included 2 mounts with spots for 3 zip ties, will work on the sides or corners, as they all share a 40mm spacing. There is a mount to add a retractable badge holder in one of the corners, is made to work with one like this - https://www.amazon.com/OFES-Retractable-Holder-Swivel-Alligator/dp/B07WPRJY9K/ref=sr_1_86?crid=2WYQVR3H13KVE&dib=eyJ2IjoiMSJ9.uGD7epHV4qnq12Y0B-4sGISycG1L_5VWnJ4liS75MO3NzPDhSAPYDJ_KS9Es4WqPkUR-vo9qWYnYoMUnTc-Tco447-FMwbxnlrefitehOwNM9e5E-kFJyB0vGVbYK4lazX9NmJTJuRR-WputesNA8ziDTAHXlQ9dmDH39Vbv944C1ECQvE0k3XiWOclbLBa-LYf_J-PucTFixviOyP75wuJKPn6pCx3IDtVenbmjvIyWbWxIpOFxRc_7NCucZ1BU.decGrT1sygKEC372dh-Negc3LzJHLctVJyQiBuWY6m0&dib_tag=se&keywords=Heavy%2BDuty%2BRetractable%2BBadge%2BHolder&qid=1731645071&s=office-products&sprefix=heavy%2Bduty%2Bretractable%2Bbadge%2Bholder%2Coffice-products%2C161&sr=1-86&th=1 Just pop out the pin and put on mount so the badge can swivel still, see photo. The one in photo is slightly different but make sure ‘UP’ is up.
If you want to help me out with buying some more filament to replace all that was used to create this.
Thanks so much.
Voron 2.4 / Trident Canopy
by PrintSomething · original on Printables ↗
3D Printers / Voron Parts & Upgrades
♥ 506⬇ 2.3k🖨 11 prints
Print profiles
Voron_24R2_Canopy_logo_back-PrintSomething.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Voron_24R2_Canopy_300_middle-PrintSomething.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Voron_24R2_Canopy_250_middle-PrintSomething.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Voron_24R2_Canopy_350_middle-PrintSomething.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Voron_24R2_Canopy_corner-PrintSomething.stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Voron_24R2_Canopy_filter_door-PrintSomething.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Voron_24R2_Canopy_filter_cut_templete-PrintSomething.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Voron_24R2_Canopy_back_top_cover-PrintSomething.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Voron_24R2_Canopy_corner_fan-PrintSomething.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Voron_24R2_Canopy_Daylight_Stick_XXL-PrintSomething.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Voron_24R2_Canopy_wire_mount-PrintSomething.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Voron_24R2_Canopy_badge_clip-PrintSomething.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print