Autumn is coming, and that's when both children and adults like to fly kites, so I prepared a small improvement to the theme of the competition!
Brief assembly instructions:
You need 2x bearing 608 ZZ-common in a sports shop as an accessory for skates
1 hook 16x30mm for guiding the cable during winding.
Some parts need to be glued
I recommend printing from durable PLA or PETG
Parts
Insert 2x bearing with a demarcation ring in the middle
Fold half the Cage B
Insert in half of the coil and glue with the coil
Finish the cage and glue the handle
Knob is made of two parts, but it is printed at the same time, then run it
Glue the other half of the coil
Finally, glue the handle with the attached hook
All done  !
There is a small eye on the spool for attaching the cable
If you find something to improve, or want to modify something, write to me.
The winding direction is opposite to the hand turning direction!
To stop the line unwinding, put the finger of the hand holding the reel between the gears and the outer gear
Geared kite reel
by Thorin Oakenshield · original on Printables ↗
Toys & Games / Outdoor Toys
♥ 670⬇ 1.1k🖨 16 prints
Print profiles
Knob.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Cage B.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Cage A.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Planet 3x.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Sunn.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Little handle.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Handle.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Inner bearings ring.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Coil 1.stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Gear ring.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Coil 2.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print