I designed these and have been using them in my shock since 2021 without issue.
Print with 100% infill, you want to maximize the volume of plastic and avoid any hollow cavities in the printed part. I recommend a high-temperature material such as ABS or Nylon, I've been using ABS. The shock gets pretty hot during long descents but ABS has stood up well.
Shallow text with the volume labels are included in the STL files if you have multi-color printing. Otherwise the slicer will ignore the text.
These only fit the eyelet version of the shock (most common), not the trunnion mounted version.
Volume Spacers for Fox Float X Shock (2022+)
by SportRotary · original on Printables ↗
Sports & Outdoor / Outdoor Sports
♥ 62⬇ 676🖨 3 prints
Print profiles
Float X 0.8 v2.stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Float X 0.4 v2.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Float X 0.2 v4.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Float X 1.0 v4.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Float X 0.6 v10.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print